Indications:
- Intra – Articular Fractures of the Distal Humerus.
- Comminuted Supracondylar Fractures of the Distal Humerus.
- Osteotomies of the Distal Humerus.
- Nonunions of the Distal Humerus.
(Two Plate Technique for the Distal Humerus).
Description
Following Screws are to be use with Above Plates:
A) 3.5mm Locking Head Screw – Self Tapping
| Stainless Steel | Hex Drive | Titanium |
|---|---|---|
| Cat No. | Size | Cat No. |
| 102.310 to 102.380 | 10mm to 80mm | Ti.102.310 to Ti.102.380 |
| Stainless Steel | Star Drive | Titanium |
|---|---|---|
| Cat No. | Size | Cat No. |
| 102.410 to 102.480 | 10mm to 80mm | Ti.102.410 to Ti.102.480 |
B) Cortical Screw 3.5mm Dia. – Self Tapping
| Stainless Steel | Hex Drive | Titanium |
|---|---|---|
| Cat No. | Size | Cat No. |
| 102.210 to 102.296 | 10mm to 100mm | Ti.102.210 to Ti.102.300 |
C) 2.7mm Locking Head Screw – Self Tapping
| Stainless Steel | Hex Drive | Titanium |
|---|---|---|
| Cat No. | Size | Cat No. |
| 101.310 to 101.350 | 10mm to 50mm | Ti.101.310 to Ti.101.350 |
| Stainless Steel | Star Drive | Titanium |
|---|---|---|
| Cat No. | Size | Cat No. |
| 101.410 to 101.450 | 10mm to 50mm | Ti.101.410 to Ti.101.450 |
Following Instruments to be use with above Plate:
| Cat No. | Description |
|---|---|
| 260.281 | Drill Bit – S.S. Quick Coupling End Dia. 2.8mm X 180mm Long Calibrated |
| 804.110 | LCP Drill Sleeve 3.5mm for Drill Bit 2.8mm |
| 804.121 | Tap for 3.5mm Locking Head Screws |
| 804.163 | Q.C. Torque Screw Driver Handle 2.5mm Tip (Torque 1.5Nm) |
| 804.168 | Hexagonal Screw Driver Q.C. End Shaft, 2.5mm Tip (for Torque Handle 1.5Nm) |
| 260.250 | Drill Bit – S.S. Quick Coupling End Dia. 2.5mm x 115mm Long |
| 264.025 | Bone Tap – Quick Coupling End Dia. 3.5mm, Thread Length50mm, Total Length 110mm |
| 260.270 | Drill Bit – S.S. – Quick Coupling Dia. 2.7mm X 125mm Long |
| 264.037 | Bone Tap Quick Coupling End Dia. 4.0mm – Cancellous, Thread Length 85mm, Total Length 110mm |
| 301.110 | Small Hexagonal Screw Driver 2.5mm Tip – Silicon Handle |
| 301.126 | Hexagonal Screw Driver With Self Holding Sleeve 2.5mm Tip (for 2.7mm Cortical, 3.5mm & 4.0mm Locking Head screws) – Silicon Handle |
| 301.125 | Hexagonal Screw Driver with Self Holding Sleeve 2.5mm Tip (for 3.5mm Cortical & 4.0mm Cancellous Screws) – Silicon Handle |
| 303.010 | Small Depth Gauge |
| XP.301.081 | Star Drive Screw Driver – 2.5mm Tip/T-15 |
| 260.210 | Drill Bit – S.S. – Quick Coupling End Dia. 2.0mm X 140mm Long |
| 264.020 | Bone Tap – Quick Coupling End Dia. 2.7mm, Thread Length 33mm, Total Length 100mm |
| 301.124 | Hexagonal Screw Driver with Self Holding Sleeve 2.0mm Tip (for 2.4 mm Cortical, Locking & 2.7mm Locking Head Screw) – Silicon Handle |
| 301.108 | Hexagonal Screw Driver 2.0mm Tip – Silicon Handle |
| 311.004 | Mini Depth Gauge (Measuring length 40mm) |
| 804.120 | LCP Drill Sleeve 2.7mm for 2.0mm Drill Bit |
| 804.122 | Tap for 2.7mm Locking Head Screws |
| 804.162 | Q.C. Torque Screw Driver Handle 2.0mm Tip (Torque 0.8Nm) |
| 804.166 | Hexagonal Screw Driver Q.C. End Shaft, 2.0mm Tip (for Torque Handle 0.8Nm) |
| XP.301.080 | Star Drive Screw Driver 2mm Tip/T-8 |
Following Size of Locking Distal Humerus Plate (DHLP) Medial Side 2.7 / 3.5mm are available in Stainless Steel & Titanium Material.
| Cat No. (Stainless Steel) | Holes (Left) | Cat No. (Titanium) |
|---|---|---|
| 862.313 | 3 Holes | Ti.862.313 |
| 862.315 | 5 Holes | Ti.862.315 |
| 862.317 | 7 Holes | Ti.862.317 |
| 862.319 | 9 Holes | Ti.862.319 |
| Cat No. (Stainless Steel) | Holes (Right) | Cat No. (Titanium) |
|---|---|---|
| 862.303 | 3 Holes | Ti.862.303 |
| 862.305 | 5 Holes | Ti.862.305 |
| 862.307 | 7 Holes | Ti.862.307 |
| 862.309 | 9 Holes | Ti.862.309 |






